Mechanical Calibration Capability:

 

 

PARAMETER

RANGE

ACCURACY

Gage Blocks Linear Standard 0.050” - 4.00” +/- 0.000001”
Length Stds Linear Standard 5.00” - 20.00” Varies
Trimos Horizontal Measuring Linear Standard   +/- 0.000009”
Caliper Standard Linear Standard 1”- 6.00” +/- 0.00015”
Angle Blocks Angular Dimensional 1/4 thru 90° +/- 0.00833° or 30 Arc Seconds
Cylindrical Square Angular Dimensional   +/- 0.00012”
Manometer Pressure 0-5 in./ H2O +/- 0.005 in./H2O
Pressure Calibrator Pressure 0-10,000 PSI +/- 0.1% of Reading
Thread Measuring Wires Complex Dimensional 4-80 TPI / 0.35-2.50 mm +/- 0.00002”/+/- 0.0013 mm
Torque Wrench System Torque 0-250 ft./lbs. +/- 0.25% of Reading
Smaller Torque Wrench/ Driver System Torque 16-160 in./oz. 0.5% of Reading
Flowmeters Flow 0-0.5 CFH/ 0-220 mL/min
0-29.5 CFH/ 0-14 LPM
2.5-79 LPM
+/- 0.2% of Reading
Anemometer Flow 60-8800 Ft./Min. 3%
Analytical/ Commercial Scale Force Measurement 0-4200 grams 0-40 Grams +/- 0.03 mg
40-130 Grams +/- 0.5 mg
130-200 Grams +/- 3 mg
200-4200 Grams +/- 0.2 g
Level System Mass 0-0.01° +/- 2% of Reading
Class 2 and F Weight Surface Plate Varies Varies
Load Cell Force Measurement 5000 lbs +/- 1% of Reading
Digital Thermometer Temperature Depending on Theromocouple 0-100°C +/- 0.05°C
Depending on Thermocouple
Viscosity Stds Viscosity 5,000 and 30,000 +/- 1% of Reading
pH Buffer Solutions pH 4,7,10 pH +/- 0.01 pH
Conductivity Stds Conductance 9.34, 1,000 and 10,000 µs/cm Varies
Fluoride STD 1,000 ppm   +/- 5 ppm F-
Roughness Std Roughness 16.1 and 119.5 Ra +/- 3 microinches